 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 14.2 mm (0.56 inch) General Purpose Blue Seven Segment Displays Technical Data HDSP-50XB Series Features * Industry Standard Size * Industry Standard Pin-Out 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers * Blue Color * Mitered Font Mitered Corners on Segments * Gray Face Paint Gray Package Gives Optimum Contrast * 50 Viewing Angle * Design Flexibility Common Anode or Common Cathode * Categorized for Luminous Intensity Requirements Exceeding 80C or Below -20C[1] * Extreme Temperature Cycling Not Recommended[1] Description These 14.2 mm (0.56 inch) blue displays use industry standard size and pin-out. The devices are available as either common anode or common cathode. The HDSP-50XB series are suitable for indoor use. Part Numbering System 5082 - X XX X - X X X XX HDSP - X XX X - X X X XX Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Minimum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] B: Blue Device Specification Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. Applications * Suitable for Indoor Use * Not Recommended for Industrial Applications, i.e. Operating Temperatures Devices Blue HDSP- Description 501B Common Anode Right Hand Decimal 503B Common Cathode Right Hand Decimal Note: 1. For details, please contact your local Agilent components sales office or an authorized distributor. 2 Package Dimensions TOP END VIEW COUNTRY OF ORIGIN 0.51 TYP. 10 PLCS (0.020) HDSP-XXXX YWW X COO 2.54 x 4 = 10.16 (0.100 x 4 = 0.400) DATE CODE 6.86 (0.270) 7.80 (0.307) 1.37 (0.054) 10 2.540 TYP. 8 PLCS LUMINOUS INTENSITY (0.100) CATEGORY 8.00 (0.315) 18.60 (0.732) 14.22 (0.560) 15.24 (0.600) 1.59 (0.063) 4.85 (0.191) 12.50 (0.492) + 0.5 4.27 - 0.35 (0.169) 6.86 (0.270) SIDE VIEW FRONT VIEW NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE 0.25 mm. Internal Circuit Diagram 10 9 8 a f b f 7 6 10 9 8 a b PIN g g 1 2 3 4 5 6 7 8 9 10 7 6 HDSP-501B COMMON ANODE FUNCTION CATHODE e CATHODE d COMMON ANODE CATHODE c CATHODE DP CATHODE b CATHODE a COMMON ANODE CATHODE f CATHODE g PIN 1 2 3 4 5 6 7 8 9 10 HDSP-503B COMMON CATHODE FUNCTION ANODE e ANODE d COMMON CATHODE ANODE c ANODE DP ANODE b ANODE a COMMON CATHODE ANODE f ANODE g e c d DP 1 2 3 4 5 e c d DP 1 2 3 4 5 COMMON ANODE COMMON CATHODE 3 Absolute Maximum Ratings at TA=25C Parameter Power Dissipated per Segment or DP Peak Forward Current per Segment or DP (1/10 Duty Cycle, 0.1 ms Pulse Width) DC Forward Current per Segment or DP[1] Reverse Voltage per Segment or DP Operating Temperature Storage Temperature Wave Soldering Conditions (1.6 mm [0.063 in.] below Body) Note: 1. Derate above 25C at 0.33 mA/C. Symbol PD IPEAK IF VR TO TS Temperature Time HDSP-501B HDSP-503B 135 70 30[1] 5 -20 to +80 -30 to +85 250 3 Units mW mA mA V C C C s Optical/Electrical Characteristics at TA=25C Devices HDSPParameter Luminous Intensity/Segment (Segment Average)[1,2] Forward Voltage/Segment or DP Peak Wavelength Dominant Wavelength[3] Reverse Current/Segment or DP[4] Symbol Iv VF PEAK d IR Min. 2.02 Typ. 3.40 3.80 428 466 Test Max. Units Conditions mcd IF = 10 mA 4.50 V nm nm A IF = 20 mA 501B 503B 100 VR = 5 V Notes: 1. Case temperature of the device immediately prior to the intensity measurement is 25C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. Intensity Bin Limits[1] (cd at 10 mA) Bin Name H I J K Min.[2] 2020 2630 3420 4200 Max.[2] 2630 3420 4200 5040 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each bin limit is 10%. IF - FORWARD CURRENT PER SEGMENT - mA 35 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 1.20 1.00 0.80 0.60 0.40 0.20 0 IF - MAXIMUM AVERAGE CURRENT - mA 35 30 25 20 15 10 5 0 10 20 40 60 80 100 30 25 20 15 10 5 0 0 1 2 3 4 5 0 5 10 15 20 25 30 VF - FORWARD VOLTAGE - V IF - FORWARD CURRENT PER SEGMENT - mA TA - AMBIENT TEMPERATURE - C Figure 1. Forward Current vs. Forward Voltage. Figure 2. Relative Luminous Intensity vs. DC Forward Current. Figure 3. Maximum Allowable Average Current per Dot vs. Ambient Temperature. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004 Agilent Technologies, Inc. Obsoletes 5988-0378EN July 17, 2004 5988-8000EN Device Reliability For reliability information, please see the reliability data sheet 14.2 mm (0.56 inch) General Purpose Blue Seven Segment Display. |
Price & Availability of HDSP-50XB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |